The number of households that have swimming pools has increased in the recent past. It has however become a big challenge to maintain these facilities in good condition. Y ou should therefore ensure that you have knowledge of what you should do to keep these facilities for long. Here are some useful tips for inspection if you have a home design with swimming pool. Features to check for judging the condition of pool In order to determine if your pool is in good working order, there are a couple key indicators to look at. After a dip in the pool, your skin should not feel especially dry. The water should not look murky or green if your pool is healthy. Should you be unfortunate enough to find that your pool is showing these symptoms, be sure to take immediate action to prevent the situation from worsening. There are many other things to consider and look at carefully including corrosion of the pipes and other appl nt to know what you should do to ensure that you have enhanced the status of your swimming pool. This is because it is not a ch eap thing to construct and it could be bad if you do let all these investments go to waste. Check the pH and alkalinity of water You should also ensure that you check the PH levels of the pool water to remain at the recommended range. This is usually between seven point six and eight. When this gets lower than this it could be acidic and corrosive, which may be damaging to your pool equipment. It is also important to look at the alkalinity of the water since it is useful in ensuring that your pool pH is maintained. It should be between eighty to one hundred and twenty parts per million. When this is too low it triggers a change in the acidity of the water which could adversely affect your appliances.